Junxy

JUNXY-TA Battery Monitoring System

☰
×
Overview

CELLCHECK intelligent battery monitor is designed specifically for single cell. CELLCHECK combines the advanced technology with patented for the most thorough stationary battery health analysis in the industry. CELLCHECK Intelligent Battery Monitor Testing: internal resistance, voltage and temperature.

Features
  • Full resistance, battery temperature and voltage monitoring for comprehensive battery state of health analysis
  • String current and ambient temperature monitoring（need TC module）li>
  • Automatic analysis of battery monitoring data, find the batteries that need replacement or maintenance （need CM module）
  • With a big storage space to save history data
  • LED on panel flashes when alarms rise up which also can be read over through serial bus
  • All operating parameters can be set over through serial bus
  • A software base on PC is available to manage multiple strings, check real-time alarm and historical data
  • Continuous 24/7 on-line monitoring
  • OneCELLCHECK monitor one cell,including internal resistance, voltage and temperature
  • Software is available to collect data from CELLCHECK
  • Serial port with Optical isolation, meet MOD BUS protocol, easy to be accessed by UPS controller
  • Easy to install without specialized training

Specifications

Environmental Operating temperature:-5℃～50℃,5％～90％RH

Storage temperature:-10℃～70℃,5％～90％RH

Used for 2V、6V or 12V battery, capacity from 30AH to 2000AH

Power Requirements

CELLCHECK：powered from the battery，less than 60mA(2V) or 25mA(12V)

TCmodule：DC8～13V,2W

Convertor:DC8～13V,0.3W

CM module：85～264VAC,100V～370VDC,15W


Options
  1. TC module Measure string current and ambient temperature
  2. CM module Manage up to 4 strings and 200cells each string
  3. Current sensor Measure string current with TC module
  4. Software It can be installed on PC and read and display data from CM modul

Applications
  • UPS
  • Telecommunications
  • Battery supplied applications
  • Utilities
  • Fire &Safety system
  • Remote monitoring
Protection: Test load and power paths are fused Measurement Range & Accuracy String voltage：20～600V，±(0.5%+0.2V) Cell voltage：1.5～2.5V，±(0.1%+1mV) 9～15V，±(0.1%+10mV) Internal resistance：100～65535uΩ Battery temperature：5℃～50℃, ±1.5℃ Ambient temperature: -10℃～+70℃，±0.5℃ String current：0～300A(optional), ±(2%+0.5A) Communications Interfaces CELLCHECK：serial port, meet MOD BUS protocol, support 200 devices on each bus TC module：serial port, meet MOD BUS protocol Convertor: serial port, meet MOD BUS protocol CM module：RS232, RS485,Ethernet 10/100 Mbps, meet MOD BUS protocol Insulation 2000VAC Installation Paste on battery or rail mounting Weight CELLCHECK:115g TC module: 260g Convertor: 40g CM module: 2.5Kg