JUNXY-AC230V-10KW-R AC load bank

Posted by Jack 13/03/2016 0 Comment(s) Products Updated,

Purely resistive load bank is the most common type of load bank, and it proves equivalent loading of both generator and prime mover. That is, for each kilowatt of load applied to the generator by the load bank, an equal amount of electrical energy converts to heat by power resistors, in a general way, this heat must be dissipated from the load bank by air forced means or other convection.

The Junxy's resistors are made by high quality finned tubular heating elements, they are of the type where the surface area is enlarged by a strip in order to heat gases. At high power the surface temperature is small and the heating element is short. Meanwhile, Load elements are cooled usually via Fan Forced Air, blower power is typically provided by an outside source. Selected load banks are available with blow

 

Technical Specifications

Model

JUNXY-AC230V-10KW-R

Load Element

Sheathed alloy resistors and external heatsink

Rated Voltage

230V(±10%) 50HZ, single phase

Rated Power

10KW  

Load Steps

4 Push Buttons: 1KW/2KW/2KW/5KW

Load Power Adjustment

Control Mode

 

Manual control by push buttons

 

 

 

 

Load Power Adjustment

by Turning on Corresponding

Push Buttons

Load

Push Buttons

1KW

Push Button 1KW

2KW

ONE of TWO Push Button 2KW

3KW

Push Button 1KW + ONE of TWO Push Button 2KW

4KW

Two Push Button 2KW

 

5KW

Push Button 5KW

Or

Push Button 1KW + TWO Push Button 2KW

6KW

Push Button 1KW + Push Button 5KW

7KW

ONE of TWO Push Button 2KW + Push Button 5KW

8KW

Push Button 1KW + ONE of TWO Push Button 2KW + Push Button 5KW

9KW

TWO Push Button 2KW + Push Button 5KW

10KW

All Push Buttons

Power Factor

PF=1.0

Load Accuracy

±5%

Display

Voltage & Current displayed by digital meter

Power Supply

230V(±10%) 50HZ, single phase

Wire Connections

Back panel: L & N

Insulation Class

F

Protection Level

IP20(indoor use)

Fan Noise

75dB

Cooling Mode

Force-air cooling

Work Mode

Continuous work

Protections

Overheating/Buzzer alarm,

Overheating/Overcurrent protection,

Dimension

483*600*355.6mm(W*L*H) (Picture below)

Weight

≈35KG

Ambient Temperature

-10℃~+50℃

Mobility

Two carrying handles in front panel

Humidity

≤95%

Altitude

≤2500 meters

Leave a Comment